Level Transmitters

CLT Continuous Level Transmitter

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering
  • Application: Industrial

Continuous Output Level Transmitters provide up to the minute tank level monitoring. Customize level transmitters to meet application requirements. Transmitters can be configured for 4 to 20 mA or proportional voltage output, stainless steel or Buna-N stem and floats, and lengths up to 72" (183 cm).


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other

FBLT Flush Tip Submersible Level Transmitters

Product Details:
  • Brand: ALM Engineering
  • Application: Industrial

The Series FBLT Submersible Level Transmitter is designed with a flush diaphragm tip that will not clog in harsh applications such as sewage lift stations. Narrow body design allows the FBLT to fit into stilling wells and narrow installations. The FBLT features a robust FKM fluoroelastomer diaphragm that is PTFE coated for a stick resistant surface that will hold up in aggressive fluids. The diaphragm cavity is filled with a gel that will not leak out versus oil or grease that our competitors use. Body is constructed of 316 SS and the cable is either polyurethane or ETFE for more corrosive applications.

The unit measures the height of liquid above the position that it is mounted in a tank or pit in reference to atmospheric pressure. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the fluid. The vent is protected with a maintenance free filter, eliminating particulate or water droplets from entering the transmitter. For extra protection against humidity, we offer the A-297 desiccant filter that can be attached to the vent tube.

The FBLT incorporates lighting and surge protection (not guaranteed or covered by warrantee) to stand up in harsh applications. Optional NPT connection allows the unit to be rigidly installed in a pipe/conduit, or to attach our A-625 hanging loop for attaching a chain for pulling out of the installation.

Product Applications

  • Sewage lift stations, industrial slurries, industrial sumps, landfill leachate, reservoirs, sludge pits, oil tanks, etc.

Model ULTM Ultrasonic Level Transmitter

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering
  • Application: Industrial

Model ULTM is a level transmitter with embedded cellular communications. This product is fit for any site where SMS is available and features flexibility for customized alerts and reports. It features a cellular (GSM) link for transmission of measured data, supporting SMS and GPRS, as well as a USB for quick set up and local monitoring. The Model ULTM provides periodic reports on the hour, and SMS reports to assigned personnel on demand. There are no on-going fees for this model’s control software due to complete data ownership. It houses an embedded, as well as an optional external temperature sensor, making it ideal for situations where rapid temperature variations may occur. The Model ULTM is a costeffective solution perfect for remote monitoring in applications such as fuel theft detection and river flood alerts.

APPLICATIONS
Model ULTM is ideal for managing fuel tanks at remote sites for various uses such as fuel theft and leakage detection, inaccurate refueling, and continuous inventory with the use of the programmable switch tracking. Due to its low power option with the use of external battery, it features a long battery life based operation. The Model ULTM can be useful for wastewater monitoring, 24/7 monitoring of sewer junctions, and identification of overflow or blockage. The Model ULTM requires no road digging and is fit for harsh weather conditions, making installation simple in a variety of locations.

IMPORTANT NOTE:

Does not include SIM card or any cellular package.
Works with AT&T and T-Mobile SIM cards in the U.S. Please make sure it will work will your cellular carrier before purchasing.
Must be a mini-SIM card.
ULTM only supports one accessory at a time.
External battery not included.
Product Applications

The Model ULTM is ideal for managing fuel tanks at remote sites for various uses such as fuel theft and leakage detection, inaccurate refueling, and continuous inventory with the use of the programmable switch tracking. Due to its low power option, it features a long battery life based operation. This model can be useful for wastewater monitoring, 24/7 monitoring of sewer junctions, and identification of overflow or blockage. The ULTM requires no road digging and is fit for harsh weather conditions, making installation simple in a variety of locations

Series CRF2 Capacitive Level Transmitter

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering

The Series CRF2 is a level transmitter providing a two-wire 4 to 20 mA output to indicate level of liquids, powders and bulk materials. State of the art sensing technology in the CRF2, using impulse RF admittance measurement provides excellent accuracy and stability. The CRF2 senses capacitance changes resulting from the height of the material in the tank between the probe and the tank wall. In non-metallic tanks or tanks that do not have the wall parallel to the probe a ground reference must be used.

The CRF2 comes with either a rigid or flexible probe depending on application installation need and probe length required. Featured in the CRF2 is easy push button calibration of zero and span. Custom order the CRF2 to any length probe that you need for your application. FEP covered probe is ideal for use with corrosive media. This technology also provides immunity to external RF sources like walkie-talkies and cell phones as well as minimal interference with radio communication or other electronic systems.

Series MBLT Miniature Submersible Level Transmitter

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering
  • Application: Industrial

The MBLT Miniature Submersible Level Transmitter is only 0.63" in diameter making it ideal for level monitoring in well and borehole applications. Constructed for years of trouble free service, the MBLT has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Featured in the MBLT is a precision ±0.10% or ±0.25% of full scale accuracy output, better than BFSL or BSL rated outputs used by most competitors. Lightning and surge protection (not guaranteed or covered by standard warranty) is included standard to stand up in harsh applications. MBLT comes with a choice of polyether polyurethane or ETFE cable materials and all are vented for barometric pressure compensation. Vent is covered with a maintenance-free filter preventing particulate or water droplets from entering the transmitter.

Product Applications

  • Ballast tanks
  • Ground water monitoring
  • Surface water monitoring
  • Dewatering
  • Down hole
  • Remediation and other environmental monitoring applications

Series PBLT2 & PBLTX Submersible Level Transmitter

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering
  • Application: Industrial

PBLT2 and PBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.

The PBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The PBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.

Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.

Product Applications

  • Wastewater
  • Sludge pits, clarifiers, digesters
  • Alum tanks
  • Chemical storage tanks
  • Oil tanks
  • Lime slurry
  • Sumps
  • Reservoirs

Series ULB Ultrasonic Level Transmitter

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering
  • Application: Industrial

The Series ULB is a direct-install level transmitter designed for non-contact measurement of solid levels. The ULB utilizes ultrasonic technology paired with automatic temperature compensation to provide reliable and accurate measurements in virtually all conditions. Sophisticated algorithms are used to overcome acoustic interferences and false echoes. An integrated LCD screen and four push buttons allow for quick and easy programming on a simple menu structure. Diagnostic capabilities and a failsafe output signal make the ULB an essential choice in critical applications

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other

Submersible Level Transmitter

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering

SBLT2 and SBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Bullet nose design protects the diaphragm from damage.

The SBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The SBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.

Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.

Product Applications

  • Well monitoring
  • Ground water monitoring
  • Environmental remediation
  • Surface water monitoring
  • Down holeWater Tanks

ULTM Ultrasonic Level Transmitter

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering

Model ULTM is a level transmitter with embedded cellular communications. This product is fit for any site where SMS is available and features flexibility for customized alerts and reports. It features a cellular (GSM) link for transmission of measured data, supporting SMS and GPRS, as well as a USB for quick set up and local monitoring. The Model ULTM provides periodic reports on the hour, and SMS reports to assigned personnel on demand. There are no on-going fees for this model’s control software due to complete data ownership. It houses an embedded, as well as an optional external temperature sensor, making it ideal for situations where rapid temperature variations may occur. The Model ULTM is a costeffective solution perfect for remote monitoring in applications such as fuel theft detection and river flood alerts.

APPLICATIONS
Model ULTM is ideal for managing fuel tanks at remote sites for various uses such as fuel theft and leakage detection, inaccurate refueling, and continuous inventory with the use of the programmable switch tracking. Due to its low power option with the use of external battery, it features a long battery life based operation. The Model ULTM can be useful for wastewater monitoring, 24/7 monitoring of sewer junctions, and identification of overflow or blockage. The Model ULTM requires no road digging and is fit for harsh weather conditions, making installation simple in a variety of locations.

IMPORTANT NOTE:

Does not include SIM card or any cellular package.
Works with AT&T and T-Mobile SIM cards in the U.S. Please make sure it will work will your cellular carrier before purchasing.
Must be a mini-SIM card.
ULTM only supports one accessory at a time.
External battery not included.
Product Applications

The Model ULTM is ideal for managing fuel tanks at remote sites for various uses such as fuel theft and leakage detection, inaccurate refueling, and continuous inventory with the use of the programmable switch tracking. Due to its low power option, it features a long battery life based operation. This model can be useful for wastewater monitoring, 24/7 monitoring of sewer junctions, and identification of overflow or blockage. The ULTM requires no road digging and is fit for harsh weather conditions, making installation simple in a variety of locations.


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other
Looking for Level Transmitters ?
© A L M Engineering & Instrumentation Private Limited
 
Desktop Site Back to top