Level Indicator

Series DBOB Continuous Level Measuring System

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering

The Series DBOB is a low maintenance, electromechanical device designed for the continuous measurement of level or volumes in silos, tanks, or hoppers. The DBOB utilizes an internal motor that drives a weight suspended by a firm stainless steel tape down to the bulk material level. Upon reaching the material, the unit reverses and the weight is drawn back into the upper stop position. The distance the weight descends is electronically measured based on the internal rotations of the unwinding tape. The DBOB is userprogrammable to output either a height signal or a volumetric signal based on the vessel geometry. The unit’s two programmable relays offer even more customization.

The 1-1/2" NPT process connection allows for simple installation on horizontal surfaces and an optional aiming flange is available for inclines. The integrated tape cleaner keeps the internal process protected from difficult material and the tough cast housing protects the unit from its surroundings. With an easy to understand measurement principle and inherent low maintenance qualities, the Series DBOB is perfect for your level measuring needs.


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other

Series DTM Dip Tape Metal Indicator

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering
  • Application: Industrial

The Series DTM is a manual, no electricity required indicator that is compact, providing uninterrupted liquid level indication for use in storage tanks or vessels. With a sturdy, lightweight design, the DTM is ideal for 30 or 55 gallon tanks. Stem and mounting fixtures are available in 316 SS or brass. Strong brass or stainless steel units are perfect for the use in water and oils offering the best temperature and pressure capabilities. The float and stem are the only parts of the DTM that make contact with the liquid, so the indication tape is always clean and easy to read. It is simple to customize the DTM level indicator in order to meet a particular application requirement. A custom configurable DTM is available in lengths ranging from 6 in (15.2 cm) up to 6 ft (182.9 cm). This level indicator is ideal for quick readouts taken periodically. The DTM is accurate to 1/16 of an inch or 1 mm, and is especially useful in remote areas where power is unavailable, or undesirable.

PRINCIPLE OF OPERATION
The float located on the DTM is equipped with a magnet that moves with the liquid level, vertically, along the stem, inside the storage vessel. Level reading is acquired by simply removing the protective cap located on the top of the unit and lifting the calibrated measuring tape until the magnetic interlock with the float causes a slight pull. The indicator tape remains at this point while the level is read where the calibration aligns with the top of the mounting. The indicator tape can then be lowered back inside the unit stem for storage and protection


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other

Series VR View-Rite Level Indicator

Product Details:
  • Minimum Order Quantity: 100 Unit
  • Brand: ALM Engineering
  • Display Type: Digital

Customize level indicators to meet application requirements. View-rite level indicators are low maintenance, environmentally friendly, durable, and require no external power. Specify any indication length up to 96 inches (244 cm). View-Rite level indicators incorporate a pressure tight housing with internal float that magnetically activates external level indication flags, switches, or transmitter. Consult factory for pressure rating up to 700 psi (48 bar) or temperature rating to 750°F (399°C).


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer),Other
Looking for Level Indicator ?
© A L M Engineering & Instrumentation Private Limited
 
Desktop Site Back to top