Carbon Monoxide Transmitter

Aerosense Carbon Monoxide Transmitter

Approx Price: Rs 4,750 / Number 
Aerosense Carbon Monoxide Transmitter is designed to detect Carbon Monoxide gas in air.
It comes in two different modes for convenient use varying voltage applications between 2-10 VDC & current applications between 4-20mA

Features:
  • Pre-Calibrated
  • Easily installed at low cost.
  • Semiconductor use to measure CO levels
  • Provides output signal proportional to CO level
  • Optimum for parking lot, tunnel & under ground places
  • Optional LCD display available
Specifications:

Measurement range: 0-250/300/500/1000 ppm
Accuracy: @20°C, 50% RH
0-100 ppm: +10% FS
0-100 ppm: +10% FS100-250/300/500/100 ppm: +15% FS

Output Signal Voltage Output: 2-10 VDC 
Current Output: 4-20 mA

Series GSTA Carbon Monoxide/Nitrogen Dioxide Gas Transmitters

The Series GSTA Carbon Monoxide/Nitrogen Dioxide Transmitters monitor the gas concentration in underground parking garages and loading docks. Carbon monoxide is commonly used to measure the exhaust of gasoline engines, while nitrogen dioxide is used for diesel engines. Field selectable current and voltage outputs allow the transmitter to be used with almost any building management controller. For carbon monoxide units, the user can select the output range to be from 0 to 50 ppm or up to 0 to 500 ppm. Nitrogen dioxide units come with a standard 0 to 10 ppm range. The output can be inverted to read 20 to 4 mA or 10 (5) to 0 VDC using internal dip switches.

To maximize the accuracy of the Series GSTA, the sensor can be field-calibrated using the A-449 remote LCD display. When the sensor reaches the end of its life, the display will indicate that the sensor needs to be replaced.

Model CMT200 Carbon Monoxide Transmitter

The Model CMT200 Carbon Monoxide Transmitter provides a field selectable current or voltage output that is proportional to the gas concentration in underground parking garages, vehicle maintenance facilities, or mechanical rooms. A field replaceable, electrochemical sensor provides accurate readings for up to 4 years with proper calibration. Field calibration can be done by using Model GCK-200CO-2000CO2 calibration gas, Model A-507A calibration adapter, and the on board span and zero potentiometers.

Product Applications

  • Parking Garages
  • Vehicle Maintenance Facilities
  • Mechanical Rooms

Aerosense Carbon Monoxide Transmitter

Approx Price: Rs 5,750 / Piece 
Aerosense Electrochemical Carbon Monoxide Transmitter provides a filed replacable current or voltage output that is proportional to the gas concentration in underground parking garages, vehicle maintenance facilities or mechanical rooms.

A field replacable, electrochemical sensor provides accurate readings upto 4 years with proper calibration.

Specifications:
  • Range: 0-200 PPM
  • Accuracy: ±2% of reading 
  • Coverage area: 5000 to 7000 sq. ft typical
  • Output drift: <5% per year in air.
  • Calibration: 15 turn span and zero adjustment potentiometers
  • Output: Jumper selectable 4 to 20mA OR 2 to 10V

Carbon Monoxide Analyzer

Approx Price: Rs 10,500 / Piece 
Carbon Monoxide Monitor measures the ambient concentration of carbon monoxide (CO) in the environment and displays the measurement on the two line digital LCD screen. Besides the measurement, the maximum recorded CO value since the last reset is shown. An audible carbon monoxide alarm gives warning of CO levels above 25 ppm. For viewing in poorly lit environments, the built-in backlight brightens the display. Model 450A includes soft carrying case with belt loop, wrist strap, and batteries.

Additional Information:
  • Item Code: AQS-1
Looking for Carbon Monoxide Transmitter ?
© A L M Engineering & Instrumentation Private Limited
 
Desktop Site Back to top